辦理交換機端口“假死”問題 |
發布時間: 2012/5/29 17:39:06 |
幾天在維護宿舍網絡時碰著一個當時感受很獨特的問題:4樓交換機的20口無論怎么連線,鏈路都不通;進入交換機,端口也啟不了;連其他的端口全沒有問題。本覺得是端口壞掉了,其后聽說是因為環路,20口被關了,錯誤規復就好了。華為交換機配置 于是上網查了查,大白了個中的原理: 交換機正在事情的端口,溘然變成封鎖狀態的假死現象,第一可以用重啟交換機來辦理,第二可以用呼吁規復。 對付用呼吁規復的要領的詳細步調如下: 步調1:查察日志/端口的狀態 登錄進入交換機后,執行showlog,會看到如下的提示: 21w6d:%ETHCNTR-3-LOOP_BACK_DETECTED:Keepalivepacketloop-backdetectedonFastEthernet0/20. 21w6d:%PM-4-ERR_DISABLE:loopbackerrordetectedonFa0/20,puttingFa0/20inerr-disablestate 以上信息就明晰暗示由于檢測到第20端口呈現了環路,所以將該端口置于了err-disable狀態。 查察端口的狀態 Switch#showinterfa0/20status PortNameStatusVlanDuplexSpeedType Fa0/20linktodatabackuperr-disabled562autoauto10/100BaseTX 這條信息越發明晰的暗示了該端口處于err-disabled狀態。 既然看到了該端口是被置于了錯誤的狀態了,我們就應該有步伐將其再規復成正常的狀態。 拯救步調2:將端口從錯誤狀態中規復返來 進入交換機全局設置模式,執行errdisablerecoverycause?,會看到如下信息: Switch(config)#errdisablerecoverycause? allEnabletimertorecoverfromallcauses bpduguardEnabletimertorecoverfromBPDUGuarderrordisablestate channel-misconfigEnabletimertorecoverfromchannelmisconfigdisablestate dhcp-rate-limitEnabletimertorecoverfromdhcp-rate-limiterrordisablestate dtp-flapEnabletimertorecoverfromdtp-flaperrordisablestate gbic-invalidEnabletimertorecoverfrominvalidGBICerrordisablestate l2ptguardEnabletimertorecoverfroml2protocol-tunnelerrordisablestate link-flapEnabletimertorecoverfromlink-flaperrordisablestate loopbackEnabletimertorecoverfromloopbackdetecteddisablestate pagp-flapEnabletimertorecoverfrompagp-flaperrordisablestate psecure-violationEnabletimertorecoverfrompsecureviolationdisablestate security-violationEnabletimertorecoverfrom802.1xviolationdisablestate udldEnabletimertorecoverfromudlderrordisablestate unicast-floodEnabletimertorecoverfromunicastflooddisablestate vmpsEnabletimertorecoverfromvmpsshutdownerrordisablestate 從列出的選項中,我們可以看出,有很是多的原因會引起端口被置于錯誤狀態,由于我們明晰的知道這臺交換機上的端口是由于環路問題而被置于錯誤狀態的,所以就可以直接鍵入呼吁: Switch(config)#errdisablerecoverycauseloopback 拯救步調3:顯示被置于錯誤狀態端口的規復情形 Switch#showerrdisablerecovery ErrDisableReasonTimerStatus ------------------------------- udldDisabled bpduguardDisabled security-violatioDisabled channel-misconfigDisabled vmpsDisabled pagp-flapDisabled dtp-flapDisabled link-flapDisabled gbic-invalidDisabled l2ptguardDisabled psecure-violationDisabled gbic-invalidDisabled dhcp-rate-limitDisabled unicast-floodDisabled loopbackEnabled Timerinterval:300seconds Interfacesthatwillbeenabledatthenexttimeout: InterfaceErrdisablereasonTimeleft(sec) ---------------------------------------- Fa0/8loopback276 Fa0/17loopback267 Fa0/20loopback250 從以上顯示的信息可以看出,這臺交換機有三個端口(Fa0/8、Fa0/17、Fa0/20)會別離在276、267、250秒之后規復為正常的狀態,實際情形也是這樣,等了幾分鐘今后,我們找了一臺條記本電腦,別離接到這幾個端口上試了一下,端口都可以正常事情了。這下總算在不重交換機的情形下,將幾個處于“假死”狀態的端口“拯救”了返來。 本文出自:億恩科技【www.allwellnessguide.com】 服務器租用/服務器托管中國五強!虛擬主機域名注冊頂級提供商!15年品質保障!--億恩科技[ENKJ.COM] |