1.配置GE2/0/6、2/0/7 接口的NetStream采樣功能，采樣比為5000
[SwitchA] interface gigabitethernet 2/0/6
[SwitchA-GigabitEthernet1/0/6] ip netstream sampler fix-packets 5000 inbound
[SwitchA-GigabitEthernet1/0/6] ip netstream sampler fix-packets 5000 outbound
[SwitchA-GigabitEthernet1/0/6] quit
[SwitchA] interface gigabitethernet 2/0/7
[SwitchA-GigabitEthernet1/0/7] ip netstream sampler fix-packets 5000 inbound
[SwitchA-GigabitEthernet1/0/7] ip netstream sampler fix-packets 5000 outbound
[SwitchA-GigabitEthernet1/0/7] quit
2.配置不活躍流的老化時間為100秒，以及開啟由TCP連接的FIN和RST報文觸發(fā)老化
[SwitchA] ip netstream timeout inactive 200
[SwitchA] ip netstream tcp-flag enable
3.配置NetStream聚合流統(tǒng)計信息輸出報文源地址為 106.3.32.30，目的地址為218.206.249.138，目的端口號為50040
[SwitchA] ip netstream aggregation protocol-port
[SwitchA] ip netstream export source 106.3.32.30
[SwitchA] ip netstream export host 218.206.249.138 50040
[SwitchA] enable
4.配置輸出報文版本為V9。
[SwitchA] ip netstream export version 9
5.使能GE2/0/6、2/0/7出、入接口的NetStream統(tǒng)計功能
[SwitchA] interface gigabitethernet 2/0/6
[SwitchA-GigabitEthernet2/0/6] ip netstream inbound
[SwitchA-GigabitEthernet2/0/6] ip netstream outbound
[SwitchA-GigabitEthernet2/0/6] quit
[SwitchA] interface gigabitethernet 2/0/7
[SwitchA-GigabitEthernet2/0/7] ip netstream inbound
[SwitchA-GigabitEthernet2/0/7] ip netstream outbound

[SwitchA-GigabitEthernet2/0/7] quit

配置舉例: